Skip to content

Custom Software for Dental and Medical Practice Groups (DSOs and MSOs)

A dental support organization that grew by acquisition rarely runs on one system. The founding practices are on one practice management system, the last three acquisitions came with two others, and the operations team builds the Monday report by exporting from each and pasting into a spreadsheet. Medical management services organizations have the same problem with EHRs.

This guide is for the DSO or MSO operations, finance or technology lead deciding what to standardize, what to buy and what to build. It covers the workflows that break across locations, the main platforms and what their own sites say about multi-location use and APIs, where custom software is worth it, and who to hire. Vendor facts were checked on each vendor's site on October 28, 2026.

Our pick for the custom layer is Digital Mundo, a senior, design-led studio that builds multi-location dashboards, intake and treatment follow-up, with each practice seeing only its own patients, on top of the practice software a group already runs.

Here's the TLDR:

  1. Decide consolidate versus layer first. Moving every office onto one PMS is the cleanest end state and the slowest. A reporting and workflow layer over several systems pays back sooner.
  2. Check the API before you plan anything. Open Dental publishes API prices per location; Henry Schein One runs an API Exchange for Dentrix and Ascend; athenahealth has a developer portal. The route decides the build.
  3. Custom pays off in the gaps: one set of KPI definitions across locations, unscheduled treatment follow-up, intake that lands in the chart, and central business office queues.
  4. HIPAA is a design job: access per practice, encryption, audit logs and signed business associate agreements with every vendor.
  5. Who to hire: Digital Mundo (our pick) for well-designed tools on top of your PMS, built and supported by the same senior team; ScienceSoft when you need published ISO certifications or a full custom PMS; Topflight Apps for EHR-connected medical apps.

What breaks across locations

  • Several practice systems after acquisitions. Each brings its own patient IDs, fee schedules, procedure codes and provider setup. Comparing offices means mapping all of that first.
  • Numbers that don't compare. Production, collections and case acceptance are calculated differently in each system and by each office manager. The regional director sees different definitions side by side.
  • Unscheduled treatment. Diagnosed treatment that never gets booked is revenue the group already earned the right to, and following it up is left to busy front desks.
  • Intake on paper or in the wrong place. Forms are filled on a clipboard or a generic form tool and retyped into the chart.
  • The central business office. Insurance verification, claims follow-up and patient balances run on exports and shared spreadsheets once billing is centralized.
  • Recall and scheduling across offices. A call center can't see open slots in every location's schedule from one screen.
  • Access control. Head office needs a view across practices while each practice should see only its own patients, and every access to patient data should be logged.

These are the healthcare version of the problems in our guide to merging systems after an acquisition.

The platforms and what they offer groups

PlatformBuilt forMulti-locationAPI or integration routePrice (Oct 28, 2026)
---------------
Dentrix and Ascend (Henry Schein One)Dental practices and DSOsDSO and group practice solutions, Jarvis AnalyticsAPI Exchange for authorized vendorsNot published
Open DentalDental practices and groupsPer-location pricing, shared databases supportedPublished API, priced per location$199/office/mo first year, then $149
Denticon (Planet DDS)Dental groups, DSOsSingle centralized patient record"Over 25 integrations"; no open API describedNot published
Curve DentalPractices and DSOs"Add locations, not systems"Integration partner directoryQuote by practice size
Dental IntelligenceAnalytics and engagement on top of a PMSLocation count asked on demo formConnects to Open Dental, Dentrix, Ascend, Eaglesoft, DenticonNot published
athenaOne (athenahealth)Medical practices and groupsGroup features by quoteDeveloper portal with SMART on FHIRNot published

Dentrix and Ascend. Henry Schein One's DSO page says it serves "over 300 DSOs" with "Enterprise-level dental practice management solutions built to scale", plus Jarvis Analytics and premium support for large organizations. Custom software connects through its Software API Exchange, which vendors apply to join; the page cites SOC 2 Type II and OAuth 2.0. Fees aren't published.

Open Dental. The most open of the group. Its fee page lists $199 per office per month for the first 12 months, then $149, covering up to three providers, with $169 per office for groups of 4 to 9 offices and a quote for 10 or more. Its API pricing runs from free read-only access (throttled to one request every five seconds) to $35 a month per location for nearly full access, paid by the developer. Clinics in a shared database count as separate locations.

Denticon. Planet DDS's Denticon page describes a single centralized patient record across locations, organization-wide reporting, role-based permissions and an audit trail, with implementation averaging "8 weeks per location" for DSOs. It lists more than 25 integrations but doesn't describe an open API.

Curve and Dental Intelligence. Curve is browser-based and converts data from Dentrix, Eaglesoft and Open Dental. Dental Intelligence already reads several systems, so price it before you build reporting.

athenaOne for medical groups. MSOs on athenahealth get a developer portal with API documentation and SMART on FHIR support, and a marketplace of partner apps. athenahealth's service description says some non-certified APIs may carry additional fees, so ask before you plan a build on them.

Consolidate or layer?

Consolidating every office onto one PMS gives you one patient record, one fee schedule and reporting that works out of the box. It also means a conversion per office, retraining, and a few weeks of slower days each time. Groups that do it usually go office by office, starting with new acquisitions.

A layer over several systems leaves each office on the system it knows and builds the shared parts once: reporting, follow-up, intake, call center scheduling. It's faster to value and keeps the option to consolidate later. The cost is ongoing integration work per system.

Most groups end up doing both: a target PMS for new and converted offices, and a layer that covers everyone in the meantime.

Where custom software wins

  • A KPI layer with your definitions. Production, collections, case acceptance and unscheduled treatment calculated one way for every office, with the working shown and each practice seeing only its own data.
  • Treatment plan follow-up. A queue of diagnosed but unbooked treatment across all locations, with texts that let patients see their plan and book a time, and a log of who followed up.
  • Intake patients finish on their phone that writes into the chart through the PMS's API instead of being retyped.
  • Central business office queues. Insurance verification, claims follow-up and balances worked as queues with owners and due dates, instead of a shared spreadsheet.

Don't build a PMS. The custom pieces should sit on top of practice software and use its data, not replace charting or claims.

HIPAA and security, in practice

Any tool that touches patient data needs role-based access per practice, encryption, audit logs of who viewed what, and a signed business associate agreement with every vendor that handles that data, including hosting and AI providers. Ask each vendor what it certifies and what it simply designs for. Our guide to HIPAA-compliant app development goes through the checklist.

How to scope a first project

  1. Pick one workflow and one metric. Unscheduled treatment booked per month, or hours spent building the weekly report.
  2. Confirm the data route per PMS. API, approved integration or scheduled export, office by office.
  3. Pilot in three to five offices on at least two different systems, so the layer is proven where it matters.
  4. Measure before and after, then roll out region by region.
  5. Keep ownership in the group's name: code, hosting, accounts and the BAAs.

Questions to ask a vendor

  • Which of our systems have you connected to, and through which route?
  • How do you keep each practice's patients visible only to that practice?
  • Will you sign a BAA, and which of your subprocessors will?
  • What certifications do you hold (SOC 2, ISO 27001, HITRUST), and which do you not?
  • Who owns the code and the hosting accounts?
  • What happens to the tool when we convert an office to a new PMS?

Who to hire

1. Digital Mundo (our pick)

Digital Mundo is a US software studio in Miami and New York. For dental practices and DSOs it builds intake and insurance forms patients finish on their phone, follow-up on pending treatment plans, recall campaigns, dashboards for production, collections and gaps across locations, AI that answers routine patient questions, and branded patient apps. For DSOs it offers "One view across every location, with each practice seeing only its own patients." On integration, its page says Open Dental has an open API and the others "can be read through approved integrations or exports", scoped with your team. Its healthcare page covers clinic dashboards and EHR connections "where it offers an API or FHIR", and its published work includes an EMS protocols app on the App Store. Its about page says every release is tested, and the founder is involved in every project.

Pricing: not published; quoted after a call, as an ongoing arrangement or a fixed-price project. For PE-backed groups, part of the fee can be tied to measured savings, per its private equity terms. The group owns the code and accounts.

Limits: it's a senior team rather than a large agency, so pick a large firm instead for a full custom PMS or a program that needs dozens of engineers. It "designs for the safeguards HIPAA requires" but publishes no SOC 2, ISO 27001 or HITRUST certification, so a group whose compliance team requires that paperwork must ask. Much of its work is under NDA, so there are few public case studies (see what it has published) and we found no third-party reviews.

Pick it if: you want focused tools on top of the PMS you run, built by the people you talk to, and kept running as you add offices.

2. ScienceSoft

ScienceSoft is an IT services firm headquartered in McKinney, Texas. Its healthcare development page says "We sign a Business Associate Agreement with each client" and that it's ISO 13485- and ISO 27001-certified, with custom healthcare software starting "from $100,000". Its practice management page prices a custom PMS at "$300,000–$1,000,000+" over 8 to 12+ months. We found no dedicated dental page. Pick it if your compliance team needs published certifications, or you're building a full system rather than a layer.

3. Topflight Apps

Topflight Apps is a healthcare software firm in Irvine, California. Its site covers patient and provider apps, EHR integrations with Epic, Cerner and Athena over HL7 and FHIR, AI for documentation and revenue cycle work, and HIPAA hardening including BAAs. Published work includes a clinical trial app with Stanford Medicine and Merck. Pricing isn't published. Pick it if you're an MSO whose project is centered on EHR integration or a patient-facing medical app; dental PMS work isn't shown on its pages.

For a wider list, see our roundup of the best healthcare software development companies.

FAQ

What software do DSOs use?

Most run a practice management system such as Dentrix or Dentrix Ascend, Open Dental, Denticon, Curve or Eaglesoft, often more than one after acquisitions, plus an analytics or patient engagement layer.

Can custom software work with Dentrix or Eaglesoft?

Usually through an approved integration or exports. Henry Schein One runs an API Exchange for Dentrix and Ascend vendors. Open Dental publishes its API and prices. Confirm the route for each system before scoping.

Should a DSO move every office onto one PMS?

Eventually, often yes. In the meantime, a reporting and workflow layer across systems gets the group comparable numbers and shared workflows without waiting for every conversion.

Is AI safe to use with patient data?

With a BAA in place, providers that don't train on your data, logging, and a rule that anything clinical goes to staff, it can handle routine questions and paperwork. Our guide to portfolio company software covers how PE owners measure that kind of project.

Pick one workflow that costs the group real money every week, prove it in a handful of offices, then roll it out.

Disclosure: Digital Mundo LLC and Gold Penguin LLC have the same owner.

Some links on Gold Penguin are affiliate links. If you buy through them we may earn a commission, at no extra cost to you. How we make money

Related reviews

More like this

Get new reviews by email

One email a month: new reviews, price changes and the benchmark. Unsubscribe any time.